Dual Xdm17Bt Subwoofer Settings (2024)

FAQs

What is the code for xdm17bt? ›

The Bluetooth passcode is "1234”. Note: The head unit can be in any mode of operation when pairing is performed.

The device name is “Dual Media Player”. The Bluetooth passcode is "1234”. Note: If passcode "1234" does not pair your device to the receiver, use passcode "0000".

Dual iPlug S is an app designed to control certain Dual brand radios. It can select from 4 different sources; Radio mode, USB mode, Bluetooth music mode and AUX mode via Bluetooth control. - Radio mode on the APP allows you to scan and store radio stations or select your favorite radio station via the radio presets.

With the unit on, long press DISP to display clock time. Press and hold DISP until the hours or minutes begin to flash, then release. Rotate the volume knob to adjust the time. Long press DISP to finish the clock setting.

The <audio> tag is used to embed sound content in a document, such as music or other audio streams. The <audio> tag contains one or more <source> tags with different audio sources. The browser will choose the first source it supports.

Try these places first: Glovebox – Some radio codes appear on a sticker in the glovebox. Vehicle handbook – You might find the code in your vehicle handbook under the stereo or security section. Alternatively, some codes are printed on a small paper or plastic card, found inside the handbook.

The iPlug P2 app connects to compatible Dual receivers via Bluetooth like a wireless remote control.

Dual Audio allows you to send your media audio to two different Bluetooth devices at once. This means that not only can you use two pairs of headphones at one time but you can share between two different sets of Bluetooth speakers as well.

Bluetooth low energy makes it possible to build two types of devices: dual-mode and single-mode devices. A dual-mode device is a Bluetooth device that has support for both Bluetooth classic as well as Bluetooth low energy. A single-mode device is a Bluetooth device that only supports Bluetooth low energy.

The reset hole is located under the volume knob of the front panel. With the unit on, press and hold DISP until the clock begins to flash, then release.

How do you set an Atmos clock? ›

To set your Atmos luxury clock to the right time (including the summer/winter time change), move the minute hand forward with one finger. Never turn the minute hand anti-clockwise and never touch the hour hand. Make sure that the balance is locked before setting your clock.

If a passkey* is required on the display of the BLUETOOTH device, enter “0000.”

3)The initial password of pairing is default to be "0000", after the pairing is successful, the host will issue a "ding dong ~ ding dong" prompt tone; at this time, open your mobile music player, the Bluetooth playback can be realized.

Note: Depending on your model, you might have to look in the “Available devices” section of your Car Audio System and find your smartphone. Click to select & pair. Depending on the model, you might be asked to enter a passkey (0000) or to verify if the passkey displayed matches on both devices.